Concrete driveways in Beveridge

Beveridge, postcode 3753, sits directly north of Kalkallo and is split between two councils. The .id community profiles list Beveridge as partly in Mitchell Shire and partly in the City of Whittlesea, so the first step for any crossover is to confirm which council your rates notice comes from. This site takes your Beveridge enquiry and refers it to an independent concreter, and the business that accepts it is responsible for its quote and its work.

A township turning into a growth area

The 2012 Lockerbie planning report put the old Beveridge township’s population at about 1,200 and described it as stretched along the Hume Highway north of the precinct. Mitchell Shire’s population forecast, prepared by .id, now expects its Beveridge area to grow from 11,696 people in 2026 to 112,187 by 2046. Stockland describes its Cloverton estate as spanning Kalkallo and Beveridge.

That leaves two very different kinds of property:

• New estate homes, which need the usual first driveway, side paths and backyard slab.
• Older township and rural blocks, which may have long gravel drives, no kerb and open table drains.

Mitchell Shire road reserve permits

For the Mitchell part of Beveridge, the shire’s works in the road reserve page says any digging in the road reserve needs a works within road reserve permit, also called a road opening permit. Crossovers and vehicle crossings are on its list of works that need one. Other conditions on that page:

• No work, digging included, may begin before the permit has been issued.
• A separate permit is needed for each project.
• Once issued, the permit is valid for 3 months unless the permit sets a different period.

The page also sets environmental conditions for roadside work, including no machinery or materials stored on the roadside, no fill or spoil on native vegetation or in tree protection zones, and no sediment laden run-off into drains or waterways. Mitchell maps roadside conservation sites, and a crossing on a high conservation roadside must explain how it will limit environmental impact. On a rural Beveridge road that can shape where a new driveway entry goes.

Whittlesea part of Beveridge

Where your property is in Whittlesea, the council’s Vehicle Crossing Policy 2024 applies instead: an application with a concept plan, then a Works in Road Reserve permit, a pre-pour inspection with 2 business days notice, and a final inspection. The vehicle crossing guide sets out both councils’ steps along with Hume’s.

Driveways on sloping and rural blocks

Long rural drives can climb from a table drain at the road, and some blocks slope enough to need care with grades. The CCAA data sheet on residential concrete driveways and paths gives the numbers a concreter works to: a maximum grade of 1 in 4 inside the property, transitions where the grade passes about 12.5 percent, and coarser finishes such as broom or tined surfaces on steep pavements for skid resistance. If a smooth exposed finish is wanted on a slope, the same guide suggests angular crushed stone rather than rounded river gravel. Read exposed aggregate driveways for more on that choice.

For a property that takes a horse float, boat or small truck, say so early. The CCAA guide raises the slab to 150 mm and N25 concrete for vehicles from 3 to 10 tonnes.

Cloverton homes on the Beveridge side

On the Cloverton side of Beveridge the job list looks like Kalkallo’s. The plain and coloured driveway guide covers the slab itself, and concrete paths covers side passages next to the house, where damp-proof course height and drainage need care.

Prices

A Melbourne cost guide lists plain concrete at $79 to $160 per square metre, exposed aggregate at $125 to $210 per square metre and stand-alone removal of old concrete at $32 to $105 per square metre. Difficult access, such as a site the truck cannot reach, adds pump or barrow costs. The Kalkallo cost guide explains each item.

Neighbouring suburbs

Kalkallo is directly south, and Donnybrook, in Whittlesea, also adjoins Beveridge.

Sending a Beveridge job

Tell us which council your property is in, whether it is an estate home or a rural block, and the rough sizes of each area. Add photos of the entry, the road edge and any slope, then send the Beveridge enquiry.

Send a job enquiry